Intel® Server Board S2600ST Family BIOS and Firmware Update for Intel® One Boot Flash Update (Intel® OFU) Utility

19139
4/28/2020

Introduction

As of 17 February 2024, no functional, security, or other updates will be provided for Intel® Server Board S2600ST Family BIOS and Firmware Update Packages. Intel® Server Board S2600ST Family BIOS and Firmware Update Packages will no longer be available after 29 March 2024. All versions are provided as is. Intel recommends that users of Intel® Server Board S2600ST Family BIOS and Firmware discontinue use as soon as possible. Intel® Server Board S2600ST Family BIOS and firmware update for Intel® One Boot Flash Update (Intel® OFU) Utility and WinPE*. (02.01.0011), read firmware dependencies in requirements section

Available Downloads

  • OS Independent
  • Size: 33.6 MB
  • SHA1: 22557371F5255ACF01499F3450C95E199682F6B9

Detailed Description

System firmware requirements

To update the system firmware stack to the versions included in this update package, the currently loaded system firmware stack on the system must meet the following:

System BIOS - 02.01.0009 
ME Firmware - 04.01.04.323 
BMC Firmware - 2.22.59c3b83a
FRUSDR - 1.76 

Failure to get to the required firmware stack, may cause unexpected results.

Supported products

Intel® Server Board S2600ST Family

See the Demo on How to update BIOS and Firmware on the Intel® Server Board S2600ST Family.

About this release

BIOS : 02.01.0011
ME : 04.01.04.339
BMC : 2.42.d0b788a4
FRUSDR : 1.79

See firmware updates and troubleshooting tips.

Support platforms and dependency

  • Processors supported:
    Intel® Xeon® Scalable processors

Microcode versions:

CPUID Version Status
0x50654 0x02000065 (1st Generation Intel(R) Xeon(R) Scalable H0,M0,U0)
0x50656 0x0400002c (2nd Generation Intel(R) Xeon(R) Scalable B0,L0,R0)
0x50657 0x0500002c (2nd Generation Intel(R) Xeon(R) Scalable B1,L1,R1)

The following update process must be followed to ensure a trouble-free update:

1. BMC firmware
2. BIOS
3. FD
4. FRUSDR
5. Manageability Engine (ME) firmware

Important note

You must install this update package using Intel® One Boot Flash Update (Intel® OFU) V14.1 Build 19 or later.

Refer to the Release Notes file for a complete list of known issues, workarounds, and detailed requirements.