Serial Lite IV Intel® FPGA IP User Guide

ID 683655
Date 10/02/2023
Public
Document Table of Contents

7.1. Reset Guidelines

Follow these reset guidelines to implement your system-level reset.
  • Tie tx_pcs_fec_phy_reset_n and rx_pcs_fec_phy_reset_n signals together on the system level in order to reset the TX and RX PCS simultaneously.
  • Assert tx_pcs_fec_phy_reset_n, rx_pcs_fec_phy_reset_n, tx_core_rst_n, rx_core_rst_n, and reconfig_reset signals at the same time. Refer to Reset and Link Initialization for more information about the IP reset and initialization sequences.
  • Hold tx_pcs_fec_phy_reset_n, and rx_pcs_fec_phy_reset_n signals low, and reconfig_reset signal high for at least 200 ns to properly reset the custom PCS and the reconfiguration blocks.
  • To achieve fast link-up between FPGA devices, reset the connected Serial Lite IV Intel® FPGA IPs at the same time. Refer to Serial Lite IV Intel® Stratix® 10 FPGA IP Design Example User Guide for information about monitoring the IP TX and RX link using the toolkit.