F-Tile Architecture and PMA and FEC Direct PHY IP User Guide

ID 683872
Date 1/24/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2.5.3. Topology 14: 1x PCIe x4 + 400G Hard IP (FGT) with PTP Example

This example assumes the following design considerations for an F-tile:

  • A PCIe* interface is required.
  • An IEEE 1588 precision time protocol interface is required.
  • FHT PMA lanes are not required.

Topology 12: 1x PCIe x8 + 400G Hard IP (FGT) with PTP , Topology 13: 2x PCIe x4 + 400G Hard IP (FGT) with PTP , and Topology 14: 1x PCIe x4 + 400G Hard IP (FGT) with PTP can implement this design. Select Topology 14: 1x PCIe x4 + 400G Hard IP (FGT) with PTP because it has the most available PMAs and streams. The following figure shows the PMA, fracture, and EMIB resource availability.

Figure 33.  Topology 14: 1x PCIe x4 + 400G Hard IP (FGT) with PTP

Legend

  • Gray: unavailable resource
  • Light blue: available 400G hard IP resource
  • Purple: available PTP resource
  • Dark blue: available PCIe* hard IP resource