HDMI Intel® Stratix® 10 FPGA IP Design Example User Guide

ID 683701
Date 1/26/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.5. View the Results

At the end of the demonstration, you will be able to view the results on the HDCP-enabled HDMI external sink.

To view the results of the demonstration, follow these steps:

  1. Power up the Intel FPGA board.
  2. Change the directory to <project directory>/quartus/.
  3. Type the following command on the Nios II Command Shell to download the Software Object File (.sof) to the FPGA.

    nios2-configure-sof output_files /<Intel Quartus Prime project name>.sof

  4. Power up the HDCP-enabled HDMI external source and sink (if you haven't done so). The HDMI external sink displays the output of your HDMI external source.